2.1.2 Default Mailbox Template
The default mailbox template is applied to new mailboxes when they are created with the Add Range... button.
This allows you to create similar mailboxes easily, with one command.
Follow the steps below to edit the default mailbox.
1.
Click Add Range....
2.
Specify a range of mailbox (From:/To:).
(Check "Use the same number for Mailbox and Extension" depending on your needs.)
3.
Enter the number of mailboxes to create next to Number of Mailboxes:.
4.
Click Edit Default Mailbox....
5.
Edit parameters in the Default Mailbox dialog box.
6.
Click OK to return to the Add Range Of Mailboxes dialog box.
7.
Click OK.
Feature Manual References
2.4.3 Default Mailbox Template
Document Version 3.0 2010/06
2.1.2 Default Mailbox Template
Programming Manual
45