Reconnect Sequence On Busy; Reconnect Sequence On No Answer - Panasonic KX-TVA50 Programming Manual

2.5.4 Parameters
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code
Feature Manual References
2.2.1 Alternate Extension Group

Reconnect Sequence on Busy

Specifies the sequence for reconnecting to the caller if the called extension is busy.
Default
F
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code

Reconnect Sequence on No Answer

Specifies the sequence for reconnecting to the caller if the called extension does not answer.
Default
F
Value Range
Max. 16 digits consisting of 0–9,
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
,: Dial Pause (default 1 s)
;: Dial Pause (default 3 s)
X: Extension Dialing
0–9, , #: Dial Code
Reconnect Sequence on Refuse Call
Specifies the sequence for retrieving a call placed on hold after the extension (in Call Screening mode) has
refused to accept it.
154 Programming Manual
, # and special codes
, # and special codes
Document Version 3.0 2010/06