Show Version - D-Link xStack DXS-3250 Cli Manual

show version

The show version User EXEC mode command displays system version information.
Syntax
show version [unit unit]
Parameters
•
unit — Specifies the number of the unit. (Range: 1-6)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays system version information (only for demonstration purposes).
Console> show version
SW version 1.0.0.0
Boot version 1.0.0.0
HW version 1.0.0
Unit SW version
---- ----------
1 1.0.0.0
2 1.0.0.0
(date 23-Jul-2004 time 17:34:19)
(date 11-Jan-2004 time 11:48:21)
Boot version
------------
2.178
2.178
Page 383
System Management Commands
HW version
----------
1.0.0
1.0.0