Delete Vlan; Config Vlan - D-Link DGS-3100 SERIES Cli Manual

Example usage:
To create a VLAN v1, tag 2:

delete vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove a vlan v1:

config vlan

Purpose
Syntax
Description
Parameters
DGS3100# create vlan v1 tag 2
Success.
DGS3100#
To delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
The delete vlan command deletes a previously configured VLAN on
the Switch.
<vlan_name 32> − The name of the VLAN to be deleted.
Only administrator or operator-level users can issue this command.
A user is required to disable Guest VLAN before deleting a VLAN.
DGS3100# delete vlan v1
Success.
DGS3100#
To add additional ports to a previously configured VLAN and to
modify a VLAN name.
config vlan vlanid <vlanid 1-4094> [ [ add [ tagged | untagged |
forbidden ] | delete ] [ <portlist> | <ch1-32> ] | vlan_name
<vlan_name 32> ]
The config vlan command allows the user to add or delete ports to
the port list of a previously configured VLAN. You can specify the
additional ports as tagging, untagging, or forbidden. The default is to
assign the ports as untagged.
<vlan_id > − The ID of the VLAN to which to add ports.
add − Specifies that ports are to be added to a previously created
vlan.
delete - Specifies that ports are to be deleted from a previously
created vlan.
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden.
<portlist> − A port or range of ports to be added to or deleted from
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
102