Countdown Timer - Polar Electro AXN500 User Manual

4.5 COUNTDOWN TIMER

The CountDown timer works like the stopwatch, but it counts the time down to zero from a preset value.
Set the CountDown timer time and start the timer in the CountDown menu.
1. To go to the CountDown menu, press the Start button in the Time main mode and press the Up
Menu COUNTDOWN is displayed.
2. Press the Start button to set the timer time.
3. Use the Up or Down
After setting the seconds the CountDown timer starts running.
4. Press the Start button to take split times.
5. If you want to pause the CountDown timer, press the Stop button. CountDown PAUSED is displayed.
6. To restart the CountDown timer, press the Start button.
7. To return to the Time main mode and use other functons while the CountDown timer is running, press and hold the Stop
button.
The CountDown timer remembers the preset value.
• If you use the same value, you do not need to set a new time when you use your CountDown timer the next time.
• If you want to reset the CountDown timer to the preset value when you have paused it, press and hold the Start button.
• If you want to reset the CountDown timer when you have paused it, press and hold the Stop button. The CountDown timer
is reset to zero. You can now set the CountDown value again.
button to adjust the hours, minutes, and seconds. Press the Start button after each selection.
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
or Down button until
95