To change the information in the lower row, press and hold the Down
1. Your current heart rate
(beats per minute)
Press
and hold
*The number of calories burned is measured after you have started recording.
Note:
• You can also change the lower row information while Action recording.
• Your current heart rate is also displayed in the Alti and Time main modes while Action recording.
• If your heart rate is not displayed and - - appears in the display, the heart rate detection has stopped. Bring the wrist unit near the Polar logo on
the transmitter to restart the heart rate detection.
• As you start Action recording, the AXN700 always activates the first heart rate limits that you have set and switched on. You can swap the heart
rate limits before starting Action recording: Press and hold the Up
2. Current rate of calories
burned (kcal/h)*
Press
and hold
button:
3. Calories burned during
Action recording (kcal)*
button to activate the alternative heart rate limits 1, 2 or 3.