Polar Electro AXN500 User Manual page 13

4. Shorten one section of the wrist band: cut along the grooves on the inner surface of the
wrist band.
Or, if you need to shorten the wrist band by more than one section: detach the buckle
also from the other end. Cut one section of the other wrist band, so that the buckle will
stay in the middle. Cut the sections one by one, so that you do not shorten the wrist
bands too much.
5. Insert the spring bar in to the last spring bar hole.
6. Attach the wrist band with the spring bar back to the buckle. Make sure that the spring
bar is placed correctly. You can here a "klick". In case you detached the buckle from
the both ends of the wrist band attach the both ends back.
7. There are small holes on both sides of the buckle plate. By shifting the spring bar you
can do the final adjustment of the band length.
THE WRIST UNIT BUTTONS AND THEIR FUNCTIONS 13