4. Continue by pressing the Start button and follow the steps below:
The display reads:
5. Time 1
SET
6. SET 12h / 24h time mode
7. SET AM/PM
(if you chose 12h mode)
8. SET HOURS
9. SET MIN
• To set another time zone, return to step 5.
• To return to the Time main mode, press and hold the Stop button.
62
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
Press Up
or Down
button
to set the flashing value
Up
/ Down
• select the time zone (1 or 2).
Up
/ Down
• select flashing 12h or 24h.
Up
/ Down
• select AM or PM.
Up
/ Down
• adjust the flashing hours.
Up
/ Down
• adjust the flashing minutes.
Press the Start button
to accept
Start
Start
(If you chose 24h mode, skip step 7.)
Start
Start
Start