Setting Intro On/Off - Polar Electro AXN500 User Manual

Setting Intro ON/OFF

1. In the Time main mode, press the Start button. Menu WATCH SET is displayed.
2. Use the Up or Down
3. Press the Start button. Settings MEMORY is displayed.
4. Press the Down button. Settings GENERAL is displayed.
5. Press the Start button. Set HR LIMITS is displayed.
6. Press the Up or Down
7. Press the Start button to turn the introduction animation on or off:
8. The display reads:
Set INTRO
ON or OFF
• To return to the Time main mode, press and hold the Stop button.
92 ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
button until Menu SETTINGS is displayed.
button until Set INTRO is displayed.
Press the Up
to switch the intro on or off.
When you browse the main modes, the main mode introduction
animation is displayed for a few seconds before you enter the
main mode display. If you do not want the intro to be displayed,
turn the intro off.
or Down button Press the Start button to
accept.