3.4.2 SETTING THE COMPASS BEARING
Set a bearing reading to help yourself keep on track.
There are two ways to set a bearing:
• Point Polar logo of the wrist unit towards the target destination or landmark and set a bearing by pressing and holding
the Up
button in the Navi main mode.
• Alternatively, set a bearing reading by following steps 1-3.
1. In the Navi main mode, press the Start button. Compass: BEARING is displayed.
2. Continue by pressing the Start button and follow the step below:
3. The display reads:
Bearing SET
• To return to the Time main mode, press and hold the Stop button.
Press the Up
or Down
button
to set your bearing reading.
MEASURING AND RECORDING WITH YOUR OUTDOOR COMPUTER
Press the Start button to
accept the value.
47