Features During Your Action Recording - Polar Electro AXN500 User Manual

3.1.4 FEATURES DURING YOUR ACTION RECORDING

In the Action main mode you can use the following functions during your Action recording.
To turn the sounds on or off: Press and hold the Up
Target Zone Alarm sounds are on.
Setting Markers for interesting points, moments or places: Press the Start button. The wrist unit informs: Marker SET for
a few seconds. After the activity, you can check the recorded Marker times and split times in the Action File. For further
information, see page 72.
Note:
• Some additional marker information, which is not shown in the Action File, can be viewed with the Polar Precision Performance software after you
transfer the Action Files to your PC. For further information, see the separate Toolkit user manual.
• Markers are also recorded automatically when the altimeter or barometer is calibrated during Action recording.
• AXN700: Markers are also recorded automatically when you go down a slope, each time you swap your heart rate limits or when you set your bearing.
• If the Marker full text is displayed, the wrist unit's memory is full. Stop Action recording and delete files. For further information, see page 73.
• You can change the HeartTouch funtion to set markers instead of browsing the main modes with the Polar Precision Performance software.
For further information, see the separate Toolkit user manual.
34 MEASURING AND RECORDING WITH YOUR OUTDOOR COMPUTER
button. The symbol indicates that the button, activity and