Polar Electro AXN500 User Manual page 45

1. In the Baro main mode, press the Start button. Press the Down
2. Continue by pressing the Start button and follow the step below:
3. The display reads:
Barometer
SEA LEVEL
• To return to the Time main mode, press and hold the Stop button.
Note:
• Every time you calibrate the sea level pressure value and Action recording is on or paused, a Marker is recorded automatically.
• To cancel the calibration, press the Stop button during calibration. Calibration FAILED is displayed and the wrist unit returns to the Barometer
CALIBRATION display.
button. Barometer CALIBRATION is displayed.
Press the Up or Down button
to set the flashing sea level
pressure value.
MEASURING AND RECORDING WITH YOUR OUTDOOR COMPUTER
Press the Start button to
accept the value.
• Calibration OK is displayed
and the wrist unit returns to
the Baro main mode.
45