Polar Electro AXN500 User Manual page 64

3. Press the Down button. WatchSet REMINDER is displayed.
4. Continue by pressing the Start button and follow the steps below:
The display reads: Press Up
to set the flashing value
5. Remind1 Up
• select one of the five reminders.
6. SET ON or OFF Up
• turn the reminder on or off.
• In 24h mode, Adjust: day, month, year, hours, and minutes or in 12h mode: month, day, year, AM/PM, hours, and minutes
with the Up or Down
• To set another reminder, return to step 5.
• To return to the Time main mode, press and hold the Stop button.
You can transfer the reminder data, with an identifying name and time, to the wrist unit from the Polar Precision
Performance software. For further information, see the separate Toolkit user manual.
How the Reminder Works
The Reminder Alarm is shown in all modes. When the Reminder Alarm sounds, the number of the reminder (or its name if you
have set it with a PC) is displayed. The Alarm stays on for one minute unless you turn it off by pressing the Start, Stop, Up
or Down button.
64 ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
or Down button
/ Down
/ Down
buttons. Press the Start button after each selection.
Press the Start button
to accept
Start
Start
(If you selected OFF, skip the following
settings for the reminder.)