Polar Electro AXN500 User Manual page 72

Viewing Recorded Markers
Markers are recorded in an Action File in two ways:
• Manually: You have taken a snapshot.
• Automatically: The wrist unit automatically records a marker when
- you start Action recording (the altitude or sea level pressure is recorded).
- you activate or calibrate the altimeter or barometer.
- you swap your heart rate limits, you set a bearing or when the wrist unit registers a slope you have done.
See the tables below.
1. In the Markers view, press the Start button to view the list of Markers. The first Marker is automatically recorded marker,
Autom 1, the altitude or sea level pressure reading when you have started Action recording.
2. Browse the Marker list with the Up
The following information starts to alternate: Split time (SPLIT), time of day (TIME) and date (DATE) when the marker was
recorded.
3. To view the details of a Maker, press the Start button. The Marker information is best viewed in the software. For further
information, see the Polar Precision Performance software's online help.
72 ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
or Down button.
Marker indicates manually taken markers.
Autom. is displayed if a marker is
automatically recorded.