Using the previously recorded maximum altitude in the Season Total Values
If the altimeter gives a faulty maximum reading, you can correct the recorded reading by using the previously recorded
maximum altitude.
1. In the Altitude max. display, press the Start button to start using the previous maximum altitude value. The wrist unit
asks: Altitude RESET?
2. Press the Up
button. Your previous maximum altitude is displayed.
The wrist unit asks: Altitude RETURN OLD?
3. Press the Start button. The wrist unit asks: Are you SURE?
4. If you are sure, press the Start button.
Alternatively, to cancel the reset, press the Stop button.
Resetting the Season Total Values to zero
Use the Season Total Values as a seasonal (or weekly/monthly) counter of your activity values by resetting them to zero once
a season. Once you have reset a value, you cannot retrieve it.
Start with any display in the previous table (Tot.Kcal,
Altitude max).
1. Press the Start button to start resetting the desired value. The wrist unit asks: RESET?
2. Press the Start button. The wrist unit asks: Are you SURE?
3. If you are sure that you want to reset the value to zero, press the Start button.
Alternatively, to cancel the reset, press the Stop button.
78
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
Slopes,
Vert.Speed
max, Vert.Speed
max, Ascent, Descent or