Stopping Or Pausing Action Recording - Polar Electro AXN500 User Manual

1. Press and hold the Start button during recording to
activate the FileView function.
2. FileView SPLIT is displayed.
FileView starts automatically scrolling through the
following information:
FileView
SPLIT Split time
HR AVG Average heart rate
HR MAX Maximum heart rate
Kcal Accumulated calories
VERT.SPD AVG Average ascent rate*
VERT.SPD MAX Maximum ascent rate*
VERT.SPD AVG Average descent rate*
VERT.SPD MAX Maximum descent rate*
SLOPES Number of slopes you have gone down*
ALTITUDE MAX (M/FT) Maximum Altitude*
ALTITUDE MIN (M/FT) Minimum Altitude*
ASCENT Ascended meters / feet*
DESCENT Descended meters / feet*
36 MEASURING AND RECORDING WITH YOUR OUTDOOR COMPUTER
3. To freeze the display for a few secods, press the Start
button. To continue automatic scrolling, press the Start
button again. To browse the FileView press the Up
Down button.
To stop viewing information while recording, press the
Stop button. The wrist unit returns to the Action
recording mode.
*These values are not displayed if your Barometer was active during
Action recording .
The wrist unit automatically counts a descent of at least 50 m /
165 ft as a slope.

3.1.6 STOPPING OR PAUSING ACTION RECORDING

You can pause recording in any main mode. The wrist unit
returns to the Action mode.
1. Press the Stop button to pause Action recording. The
wrist unit displays: Action PAUSED.
Flashing indicates that your Action recording is
paused.
2. To continue recording, press the Start button. Action
recording starts again.
Alternatively to stop recording, press the Stop button
again. Action STOPPED is displayed for a few seconds
before the wrist unit returns to the Time main mode.
or