Polar Electro AXN500 User Manual page 88

6. Press the Start button to specify your heart rate limits and follow the steps below:
The display reads:
Only if you are using AXN700:
HR Limits 1, 2 or 3
7. Limit High:
• SET ON or OFF
• SET LIMIT
8. Limit Low:
• SET ON or OFF
• SET LIMIT
• To set another heart rate limit, return to step 6.
• To return to the Time main mode, press and hold the Stop button.
For futher information on how the Target Zone Alarm works, see page 35.
Note: If you turn the heart rate limits off, there is no Target Zone Alarm in the Action main mode and no limit values are calculated in the Action File.
88 ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
Press Up or Down button
to set the flashing value
Up / Down
• select the heart rate limit you want to set.
Up / Down
• turn the upper limit on or off.
Up / Down
• adjust the upper limit.
Up / Down
• turn the lower limit on or off.
Up / Down
• adjust the lower limit. The lower limit
cannot be higher than the upper limit value.
Press the Start button
to accept
Start
• quit your selection.
Start
• if you turn the limit off, move to step 8.
Start
Start
• if you turn the limit off, skip the rest of the steps.
Start