Setting Sound On/Off - Polar Electro AXN500 User Manual

Setting Sound ON/OFF
The sound settings affect the following sounds: the button sound, Heart Rate Target Zone Alarms, and the start and stop
sounds of the Stopwatch, CountDown and Action timers. The sound settings do not affect the watch alarms (Daily Alarms
and reminders), Altitude Alarms, Memory Full Alarm or Fitness Test Completed/Failed Sound.
1. In the Time main mode, press the Start button. Menu WATCH SET is displayed.
2. Use the Up or Down
3. Press the Start button. Settings MEMORY is displayed.
4. Press the Down button. Settings GENERAL is displayed.
5. Press the Start button. Set HR LIMITS is displayed.
6. Press the Down button. Set SOUND is displayed.
7. Press the Start button to turn the sound on or off:
The display reads:
Set SOUND
ON or OFF
• To return to the Time main mode, press and hold the Stop button.
Note: The wrist unit sounds are turned off when the low battery symbol
appears.
button until Menu SETTINGS is displayed.
Press the Up
to switch the sound on or off.
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
or Down button
is displayed. However, the Watch Alarm will work if it is set before the
Press the Start button to
accept.
symbol
93