Polar Electro AXN500 User Manual page 81

1. To go to the Settings menu, press the Start button in the Time main mode. Menu WATCH SET is displayed.
2. Press the Up or Down
3. Press the Start button. Settings MEMORY is displayed.
4. Press the Start button. The following information is displayed:
5. Continue adjusting the Memory Settings by following the step below:
The display reads:
Memory
RATE SET
• To return to the Time main mode, press and hold the Stop button.
button until Menu SETTINGS is displayed.
Memory rate
Memory left with the selected memory rate option
Press the Up
to set the flashing memory rate.
ADJUSTING SETTINGS, REVIEWING FILES AND USING TIMERS (TIME MAIN MODE)
or Down button Press the Start button to accept.
The amount of Memory LEFT in
hours is displayed for a few
seconds. The wrist unit returns to
the Settings MEMORY display.
81