Polar Electro AXN500 User Manual page 42

Manual Calibration
1. In the Alti main mode, press the Start button. Press the Down
2. Continue by pressing the Start button and follow the steps below:
The display reads: Press Up
to set the flashing value
Up
3. Calibrate
• select manual calibration (MANUAL).
MANUAL/ LIST
Up
4. Calibrate
• set the altitude of your current location.
MANUAL
• To return to the Time main mode, press and hold the Stop button.
Note: To cancel the calibration, press the Stop button when the calibrated value flashes. Calibration FAILED is displayed and the wrist unit returns to the
previous display.
Using a Calibration List
If you have created a calibration list with the Polar Precision Performance software you can use, preprogrammed altitude
points for example during your hiking route. When you arrive at a preprogrammed calibration point, just accept the point
from your list.
Transfer the list you have created with the software to the wrist unit. For further information, see the Polar Precision
Performance software's online helps.
42 MEASURING AND RECORDING WITH YOUR OUTDOOR COMPUTER
or Down button
/ Down
/ Down
button. Altitude CALIBRATION is displayed.
Press the Start button
to accept
Start
Start
• Calibration OK is displayed and the wrist unit returns
to the Alti main mode.