1 ] Fully Discharging And Then Charging - Denso BHT-4000 User Manual

[ 1 ] Fully Discharging and then Charging

(1) Power on the CU-4000.
(2) Load a battery cartridge into the CU-4000.
The CU-4000 flashes the CHG
the cartridge. The discharging time differs depending upon the battery condition,
but never more than two hours.
Upon completion of discharging, the CHG
4000 starts charging.
After approx. eight hours of charging, the CHG
indicating that the charging operation is completed.
(3) Press the battery ejection button to take out the battery cartridge.
Charging Operation and LED Indication
Operator's Action
Power on the CU-4000.
⇓
Load a battery
cartridge into the
CU-4000.
⇓
(After discharging)
⇓
(After approx. 8 hours)
⇓
Take out the battery
cartridge.
II
LED (every two seconds) and starts discharging
CU-4000 Status
On standby
⇓
Discharging
⇓
Ordinary charging
⇓
Trickle charging
⇓
On standby
142
II
LED comes to stay on and the CU-
II
LED flashes (every 0.5 second),
LED Indication
POWER DATA
ON
POWER DATA
ON
POWER DATA
ON
POWER DATA
ON
POWER DATA
ON
CHG I CHG II
CHG I CHG II
Flashing every
2 seconds
CHG I CHG II
ON
CHG I CHG II
Flashing every
0.5 second
CHG I CHG II
OFF