Denso BHT-4000 User Manual page 57

UPLOAD PROGRAM FILE
** Loading **
⇓
UPLOAD PROGRAM FILE
SAMPLE3.PD3
** Loading **
XXXXX/YYYYY
⇓
UPLOAD PROGRAM FILE
SAMPLE3.PD3
** Completed **
YYYYY/YYYYY
If an error occurs during uploading
If an error occurs during downloading, the following screen will appear with the
RETRY
prompt " ?" and the beeper beeps three times. For the probable causes and
recovery actions to be taken, refer to Chapter 5, Section 5.2.
To retry the uploading operation, press 1 and ENT keys; to abort it, press 2
and ENT keys.
UPLOAD PROGRAM FILE
Communication error !!
RETRY? 1:Yes
Chapter 2. Getting Started the BHT-4000 and System Mode
Upon start of optional Transfer Utility or its
equivalent program (upon receipt of an ACK
code from the host computer), the BHT-4000
shows the screen shown at left.
(Refer to the "Transfer Utility Guide.")
While the uploading operation is in progress,
the screen shown at left is displayed indi-
cating the file name (on the 4th line) and the
number of sent records/the total number of
records (on the 8th line).
To abort the uploading operation, press
C key. The screen will shift back to the
UPLOAD menu.
Upon completion of uploading, the number
of sent records becomes equal to the total
number of records and the beeper beeps for
one second. Pressing C key will shift back
to the UPLOAD menu.
A communications error has occurred.
2:No
47