Denso BHT-4000 User Manual page 75

[ 5.5 ] Aging test
TEST AGING
DATE 93/10/20
TIME 15:00:00
Once this test is selected, the automatic powering-off function becomes disabled.
Be sure to turn the power off or press C key to return to the TEST MENU screen.
[ 5.6 ] Communications test
Before starting the communications test in System Mode, it is necessary to jump back
the RS-232C interface ports on the CU-4000 and on the BHT-4000 with the testing
connectors arranged as shown on the next page.
Interface port
Optical interface port on the CU-4000
Direct-connect interface port on the
BHT-4000
Chapter 2. Getting Started the BHT-4000 and System Mode
Selecting "Aging" on the TEST MENU pro-
ceeds to the aging test while showing the
current date and time on the LCD. (This test
is intended for personnel which check the
BHT-4000 in the factory.)
To return to the TEST MENU screen, press
C key.
Testing connectors required
25-pin D-sub connector (DB-25P)
QM connector
65