Denso BHT-4000 User Manual page 31

Operating the BHT-4000
DOWNLOAD SYSTEM
1:Optical
2:Connector
RAM Size XXXXX
ROM Ver. X.XXX
DOWNLOAD SYSTEM
Optical Speed
1:2400 2: 4800
3:9600 4:19200
DOWNLOAD SYSTEM
I/F Connector Speed
1:2400 2: 4800
3:9600 4:19200
5:38400
DOWNLOAD SYSTEM
** Waiting **
Chapter 2. Getting Started the BHT-4000 and System Mode
(1) Press PW key while holding down the
trigger switch,
The DOWNLOAD SYSTEM menu screen
shown at left will appear.
(2) To use the optical interface, press 1
and ENT
connect interface, press 2 and ENT
keys.
(To return to the DOWNLOAD SYSTEM
menu, press C key.)
Selecting the optical interface displays the
screen shown at left.
Selecting the direct-connect interface dis-
plays the screen shown at left.
(3) Select the transmission speed by using
the numerical keys and press ENT
key. (The transmission speed should be
the same as the speed to be specified in
the host computer.)
(To return to the previous screen, press
C key.)
The screen shown at left will appear, show-
ing that the BHT-4000 is waiting for a file to
be downloaded.
(4) Proceed to the
Computer
(To return to the previous screen, press
C key.)
21
F1 key, and C key.
keys; to use the direct-
Operating the Host
.