Denso BHT-4000 User Manual page 41

(3) Press 3 key on the SET SYSTEM screen to select "Date/Time".
Press ENT key, and the following screen will appear.
(4) Use the numerical keys to enter the year (only the last two digits), month, day, hour,
and minute in this order. If the data is in one digit, add 0 (zero) preceding the data.
If you make a wrong entry, press BS key to delete it and enter the correct data.
[Example] To set 1993, October 20, at 2:00 p.m.
Press 9 , 3 , 1 , 0 , 2 , 0 , 1 , 4 , 0 , and 0 keys.
• For the year, be sure to enter the last two digits of the year. For the hour,
enter it in the 24-hour format.
• If any of the year, month, day, hour, and minute is not entered, the ENT
key becomes inoperable.
(5) Press ENT key to register the above setting.
(6) Press C key to return to the SET SYSTEM screen.
Chapter 2. Getting Started the BHT-4000 and System Mode
SET DATE/TIME
00/01/01 00:00
_ / / :
SET DATE/TIME
00/01/01 00:00
93/10/20 14:00
SET DATE/TIME
93/10/20 14:00
_ / / :
31