Denso BHT-4000 User Manual page 63

BARCODE OPTION
Invert 1:ON
Touch Read 3:ON
Marker 5:ON
Viewfinder 7:ON
DECODE LEVEL
Count 2
Chapter 2. Getting Started the BHT-4000 and System Mode
Selecting "Option" on the SET BARCODE
menu displays the screen shown at left. Re-
versed are the current settings. (The de-
2:OFF
faults are "OFF".)
4:OFF
Invert
6:OFF
8:OFF
Touch Read : Switches to the touch scan-
Marker
Viewfinder : Turns on or off the barcode
Select a desired setting by using the nu-
merical keys, then press ENT key.
To return to the SET BARCODE menu, press
C key.
Selecting "Decode level" on the SET
BARCODE menu displays the screen shown
at left. Reversed is the current setting. (The
default is "2".)
To increase the decode level, press
key; to decrease it, press
setting range is from 1 to 9.
After selecting the level value, press ENT
key.
To return to the SET BARCODE menu, press
C key.
53
: Activates or deactivates the
black-and-white inverted label
reading function.
ning (ON) or long-range scan-
ning (OFF).
: Turns on or off the marker
indication on the object to be
scanned.
scanning status indication.
This setting takes effect only
when the system status indi-
cation is set to ON (refer to
[4.2]).
F7
F5
key. The