Denso BHT-4000 User Manual page 44

Operating the Host Computer
(1) Load the "BHT-BASIC 3.0 System Pack" floppy disk into the drive of the host com-
puter.
(2) Enter the following at the MS-DOS command line to initiate System Loader con-
tained in the floppy disk, and the host computer will start downloading Easy Pack
4.2.
X>TS3 EASYPACK.PD3
Where, " X " denotes the name of the drive in which you loaded the floppy disk. The
" " is the program file name of System Loader. The "
TS3
name of Easy Pack 4.2 to be downloaded. For the options, refer to Subsection 2.3.2
[ 1 ] Downloading System Program.
Downloading
If downloading starts:
[ BHT-4000 ]
DOWNLOAD PROGRAM FILE
** Loading **
DOWNLOAD PROGRAM FILE
EASYPACK.PD3
** Loading **
XXXXX/YYYYY
[ Host computer ]
System Loader 3 VX.XX
Copyright (C) DENSO CORPORATION. 1993 all rights reserved
Option
EASYPACK.PD3
The BHT-4000 displays the screen shown at
left.
While the downloading operation is in
progress, the screen shown at left is dis-
played indicating the program file name
(
EASYPACK.PD3
number of received sectors/the total number
of sectors.
The host computer displays the screen given
below.
34
" is the file
on this screen) and the