1 ] "Collect Data" Mode - Denso BHT-4000 User Manual

[ 1 ] "Collect Data" Mode

In this mode, you can read bar codes and enter data from the keypad. You can also
refer to or modify the ID code and data entered previously.
Before accessing this mode, it is necessary to prepare a data file in the "Create File"
mode of the manager's menu (refer to Subsection 4.3.2, [ 1 ]). Also, you should select
a desired file number in the "Select File" mode of the user's menu.
Pressing 1 key on the user's menu displays either of the following screens, depend-
ing upon whether the ID code entry has been selected or not in the "Create File" mode
of the manager's menu.
File number
==cáäÉN===ONJMVJVP
==fa|
=====jriqf=h=MMMMN
Bar code type
ID item
[ When the ID code entry has been selected ]
File number
Current date
Item designation
Bar code type
Keypad entry
Record number
Current date
Keypad entry
availability
1 to 4
DD-MM-YY
ID item
Data item
EAN
ITF
NW7
CODE39
CODE93
CODE128
MULTI
(No indication)
K
(No indication)
00001-32767
107
Data item
==cáäÉN===ONJMVJVP
==^W|
=====jriqf=h=MMMMN
Record number
[ When the ID code entry has not been selected ]
File number selected in the "Select File"
mode
Day, month, and year
ID code
Data item codes A to D (Up to 4 data
items are available.)
EAN-13, EAN-8, UPC-A, or UPC-E
Interleaved 2 of 5
CODABAR (NW7)
CODE39
CODE93
CODE128
Multi-code reading
Bar code entry not available
Keypad entry available
Keypad entry not available
Chapter 4. Easy Pack 4.2