Denso BHT-4000 User Manual page 45

If downloading is completed normally:
[ BHT-4000 ]
DOWNLOAD PROGRAM FILE
EASYPACK.PD3
** Completed **
YYYYY/YYYYY
[ Host computer ]
00 : Normal end.
If an error occurs during downloading:
[ BHT-4000 ]
The BHT-4000 beeps three times while showing the error message (refer to Subsection
2.4.3, [ 2 ] Downloading).
To retry downloading, press 1 and ENT keys; to abort it, press 2 and ENT
keys.
[ Host computer ]
The host computer displays the error code and message.
For the details about the error codes & messages which may appear during download-
ing of Easy Pack 4.2 with System Loader (TS3), refer to Subsection 2.3.2, [ 1 ] Down-
loading System Program.
To retry downloading, initiate System Loader (or Transfer Utility) at the MS-DOS
command line again.
Chapter 2. Getting Started the BHT-4000 and System Mode
The BHT-4000 displays the screen shown at
left and beeps once. (The
on the screen shown at left is the program
name of Easy Pack 4.2.)
The host computer displays the screen
shown at left.
35
EASYPACK.PD3