Denso BHT-4000 User Manual page 68

[ 4.7 ] Deleting a user program file or data file
DELETE
1:Program File
2:Data File
⇓
DELETE PROGRAM
EASYPACK.PD3
SAMPLE1.PD3
SAMPLE2.PD3
SAMPLE3.PD3
⇓
DELETE PROGRAM
SAMPLE1.PD3
Delete ?
1:Yes
⇓
DELETE PROGRAM
SAMPLE1.PD3
** Completed **
Pressing SF and 0 keys on the SET SYS-
TEM menu screen displays the screen shown
at left.
1 Program File : Deletes a user program
2 Data File
Select the file to be deleted by using the
numerical keys and press ENT key.
To return to the SET SYSTEM menu, press
C key.
The selected file type (PROGRAM or DATA)
is shown on the 2nd line of the LCD. In the
screen shown at left, the PROGRAM file is
selected.
If more than one program file is stored in
the user area of the RAM as shown at left,
use F5 and F7 keys to move the cursor
to the program to be deleted and then press
ENT key.
The screen shown at left will appear.
To delete the program, press 1 key; to can-
cel, press 2 key.
2:No
When the designated file is deleted, the
screen shown at left appears.
To return to the SYSTEM MENU screen,
press C key two times.
58
file (including Easy Pack
4.2).
: Deletes a data file.