Table of Contents
Advertisement
Pressing 3 key on the manager's menu displays the screen as shown below.
==pÉí=`çåÇáíáçå
==NWpéÉÉÇ===OWa~í~
==PWm~êáíó==QWpíçé
==RWmêçíçÅçä
==péÉÉÇ===NW==PMM
==OW=SMM==PW=NOMM
==QWOQMM==RW=QUMM
==SWVSMM==TWNVOMM
==a~í~
==NWTÄáíë=OWUÄáíë
==m~êáíó
==NWkçåÉ==OWlÇÇ
==PWbîÉå
Press each of 1 through 5 keys to shift
to a desired setting screen.
1
:
Transmission speed setting
2
:
Character length setting
3
:
Parity setting
4
:
Stop bit setting
5
:
Protocol setting
Setting the transmission speed, charac-
ter length, parity, and stop bits
Pressing 1 key on the above screen dis-
plays the screen shown at left.
The current setting is reverse-displayed. In
this sample, the transmission speed (bit rate)
is set to 19200 bps.
Select a desired speed by pressing the cor-
responding numerical key, and your selec-
tion is registered and the screen automati-
cally returns to the "Set Condition" menu.
Pressing 2 key on the "Set Condition"
menu displays the screen shown at left.
Select a desired character length by press-
ing the corresponding numerical key, and
your selection is registered and the screen
automatically returns to the "Set Condition"
menu.
Pressing 3 key on the "Set Condition"
menu displays the screen shown at left.
Select a desired parity condition by press-
ing the corresponding numerical key, and
your selection is registered and the screen
automatically returns to the "Set Condition"
menu.
121
Chapter 4. Easy Pack 4.2
Advertisement
Chapters
Table of Contents
