Errors In System Mode - Denso BHT-4000 User Manual

5.2 Errors in System Mode

If some error occurs during operation in System Mode, one of the following error
messages will appear on the LCD.
EXECUTE PROGRAM
********************
* NO FILE EXISTS
********************
SET EXECUTE PROGRAM
********************
* NO FILE EXISTS
********************
UPLOAD DATA FILE
********************
* NO FILE EXISTS
********************
UPLOAD PROGRAM FILE
********************
* NO FILE EXISTS
********************
When selecting a program file or data file
Problem
You attempted to execute a user program in
the "Execute" menu although no user pro-
gram files (including Easy Pack 4.2) had been
stored in the RAM.
*
Solution
Press C
MENU screen, then download user pro-
grams. (Refer to Chapter 2, Subsection 2.4.3,
[ 2 ].)
Problem
In the "Set mode" menu, you attempted to
select a user program file (including Easy
Pack 4.2) as an execution program to be run
when the power is first applied, although no
*
user program files had been stored in the
RAM.
Solution
Press C
MENU screen, then download user pro-
grams. (Refer to Chapter 2, Subsection 2.4.3,
[ 2 ].)
Problem
You attempted to select a data file for up-
loading in the "Upload" menu although no
data files had been stored in the RAM.
*
Solution
Press C
MENU screen.
*
127
Chapter 5. Error Messages
key to return to the SYSTEM
key to return to the SYSTEM
key to return to the SYSTEM