2 ] "Delete File" Mode; 3 ] "Set Condition" Mode - Denso BHT-4000 User Manual

[ 2 ] "Delete File" Mode

You can delete files containing both data collected in the "Collect Data" mode of the
user's menu and the file conditions created in the "Create File" mode of the manager's
menu.
The "Delete Data" mode of the user's menu erases only the data in the desired file.
The file number of a file deleted in this mode reappears on the "Create File" mode
screen, allowing you to use it for other applications.
Pressing 2 key on the manager's menu displays the screen showing the existing file
numbers.
==aÉäÉíÉ=cáäÉ
==NWcáäÉN
==PWcáäÉP

[ 3 ] "Set Condition" Mode

You can modify the communications parameters in this mode. Listed below are the
communications parameter defaults in Easy Pack 4.2.
Communications Parameters
Transmission speed (Bit rate)
Character length
Parity
Stop bits
Protocol
In the sample shown at left appear files 1
and 3 which exist.
Select the file to be deleted by using the
numerical keys.
Upon completion of deletion, the screen will
automatically return to the manager's menu.
Serial number
Horizontal parity (BCC)
RS/CS control
120
If the above operation results in no
file existing in the RAM, the message
"File not found!!" appears and the
beeper beeps three times.
Defaults
19200 bps
8 bits
None
1 bit
Enabled
Enabled
OFF