Denso BHT-4000 User Manual page 67

[ 4.6 ] Setting the resume function and shift-key function
SET OTHERS
Resume
1:ON 2:OFF
[SF]key
3:NonLock 4:OneTime
Chapter 2. Getting Started the BHT-4000 and System Mode
Selecting "Others" on the SET SYSTEM
menu displays the screen shown at left. Re-
versed are the current settings.
Resume : Activates or deactivates the
resume function which resumes
the display shown before the
power was turned off, when the
BHT-4000 is powered up.
[ SF ] key : Switches the function of
key.
NonLock: The keypad will be
shifted only when the SF key
is held down.
OneTime: Once the SF key is
pressed, the next one key
pressed will be shifted and the
following keys will not be
shifted.
Select a desired setting by using the nu-
merical keys, then press ENT key.
To return to the SET SYSTEM menu, press
C key.
Reference: The BHT-4000 automatically dis-
plays the shift-key icon
the bottom of the LCD (as de-
fault) when the keys are shifted.
You may erase it by modifying
the system status indication set-
ting on the SET DISPLAY menu
(refer to [4.2]) or by using the
OUT statement in user programs
(refer to the "BHT-BASIC 3.0 Pro-
grammer's Manual").
57
SF
on