Frame wiring harness
e
Caution:
Use (yellow) galvanized bolts for the ground (earth)
connection to the engine.
Screws with unsuitable corrosion proofing can
cause the electrical resistance to rise as high as
80
.
Run wiring without kinking and avoid risk of abra-
sion.
Note the number and position of the cable straps.
•
Apply a thin coating of contact grease, e.g.
CENTOPLEX 3 CU to the central earth (ground)
point, which must be cleaned to bright metal
first.
L
Note:
When removing the wiring harness, take out the
central electrical equipment box at the same time.
X
Tightening torque:
Ground (earth) connection to engine .............. 7 Nm
61.7