Clutch Hose Removal; Horn Removal (Te) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
GENERAL PROCEDURES

Clutch hose removal

- Loosen the fitting (1) of the clutch hose (2) on the left-hand of the engine.
- Drain any oil left in the hose. On assembly, bleed the clutch system as de-
scribed in Section "P".

Horn removal (TE)

- Remove saddle and fuel tank (in this order) as outlined in the relevant para-
graphs.
- Loosen the screw (1) securing the spoiler to the right-hand radiator.
- Disconnect the two connectors (2) and remove the horn (3) with its bracket.
E.21
Workshop Manual Ed. 07-2012