HYDRAULICALLY CONTROLLED CLUTCH
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
Clutch master cylinder servicing
Drain the circuit, detach the master cylinder from the left side of the handlebar
and take it apart. Replace all seals, reassemble the master cylinder and refit it
to the handlebar. Reconnect the hose and fill fresh fluid into the reservoir; bleed
the system as described in the relevant paragraph.
H10161
Workshop Manual Ed. 12-2011
P.5