Soft Switch Set; Description; Default Setting; Country For Each Marketing Area - Konica Minolta magicolor 2590MF Service Manual

12. SOFT SWITCH set

12. SOFT SWITCH set

12.1 Description

This machine is equipped with totally 64 soft switches that are used for fax adjustment in
order to conform to the standard of each country.
The default setting is changeable.
The default setting of soft switch is automatically changed according to the following set-
tings.
• The marketing area is set in procedures of [USER SETTING] → [FAX PTT SETTING].
• The marketing area is set at [Fax PTT Setting:] by using LSU utility software.
• When the setting is made in the procedures of [SERVICE MODE] → [CLEAR DATA] →
[SRAM CLEAR], the default setting is defined according to the current setting of market-
ing area.
Bit No. can be changed with the following way.
• [SOFT SWITCH] of [SERVICE MODE].
See P.140
SERVICE MODE
6. SOFT SWITCH
Hex-binary
conversion list
4 (8)
3 (7)
Bit No.
2 (6)
1 (5)

12.2 Default setting

12.2.1

Country for each marketing area

NOTE
• A different country may be applicable depending on the communications stan-
dard.
• The marketing area settings is set in the procedure of [USER SETTING] → [FAX
PTT SETTING].
See P.101
148
0 1 2 3 4 5
0 0 0 0 0 0
0 0 0 0 1 1
0 0 1 1 0 0
0 1 0 1 0 1
Field Service Ver. 1.0 Aug. 2007
6. SOFT SWITCH
#01=10000000
Bit No. 1 2 3 4 5 6 7 8
HEX
6 7 8 9 A B
0 0 1 1 1 1
1 1 0 0 0 0
1 1 0 0 1 1
0 1 0 1 0 1
4139F3E529DA
C D E F
1 1 1 1
1 1 1 1
0 0 1 1
0 1 0 1