Setting The Printing Area For Folio Paper; Checking The Operation Of The Fan Motors - Kyocera TASKalfa 300i Service Manual

2K5
Maintenance
item No.
Caution
U034
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
U034
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting the printing area for folio paper

U035
Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual printing
area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
Display
LENGTH DATA
WIDTH DATA
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Checking the operation of the fan motors

U037
Description
Drives the fan motors.
Description
To check the operation of the fan motors.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
Display
Right Fan
Rear Fan
Conveying Fan
Power Source Fan
Eject Fan
ALL
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-24
U067 U072
(P.1-3-31) (P.1-3-36)
Setting
Length
Width
Operation
Developing fan motor (DEVFM) is turned on
Fuser fan motor (FUFM) is turned on
Paper conveying fan motor 1, 2 (PCFM1, 2) are turned on
Power source fan motor (PSFM) are turned on
Eject fan motor (EFM) is turned on
All fan motor are turned on
Description
Setting range
330 to 356 mm
200 to 220 mm
Initial setting
330
210