(7) Detaching and refitting the fuser thermistor 2
Follow the procedure below to replace the fuser thermistor 2.
Procedure
1. Remove the fuser unit (see page 1-5-37).
2. Unhook four hooks and remove the fuser
unit cover.
3. Remove the connector.
4. Remove the band.
5. Remove the screw and remove the fuser
thermistor 2.
6. Replace the fuser thermistor 2 and install
the thermistor.
7. Refit all the removed parts.
Band
Hook
Connector
Hook
Screw
Fuser thermistor 2
Hook
Hook
Fuser unit cover
Figure 1-5-85
Figure 1-5-86
2K5
1-5-47