Kyocera TASKalfa 300i Service Manual page 213

9. Remove the connector of the inverter PWB.
10. Release the clamp and remove the wire.
11. Pull the connector out from the opening on
the rear of the scanner unit.
12. Remove two films.
13. Remove the wire guide lid.
14. Move the mirror 1 frame to notch position.
Inverter PWB
Opening
Figure 1-5-31
Film
Mirror 1 frame
Notch position
Figure 1-5-32
2K5
Connector
Clamp
Clamp
Film
Notch position
Wire guide lid
1-5-17