Connect The Power Cord; Installing Toner; Setting The Delivery Date (Maintenance Item U278); Output An Own-Status Report (Maintenance Item U000) - Kyocera TASKalfa 300i Service Manual
Hide thumbs
Also See for TASKalfa 300i:
- Operation manual (426 pages) ,
- User manual (92 pages) ,
- Release notes (6 pages)
Table of Contents
Advertisement
2K5
Connect the power cord.
1. Connect the power cord to the connector on the machine.
2. Insert the power plug into the wall outlet.
Installing toner.
1. Turn the main power switch on. Toner installation is started.
2. The drive chain is disengaged when toner installation is completed.
Run maintenance mode U130 if [Add Toner] remains displayed even after the drive chain is disengaged.
Setting the delivery date (maintenance item U278).
1. Press the status/job cancel key. Enter the maintenance mode by entering 10871087 using the numeric keys.
2. Enter 278 using the numeric keys and press the start key.
3. Select [TODAY] and press the start key. The delivery date is set.
4. Press the stop key.
Output an own-status report (maintenance item U000).
1. Enter 000 using the numeric keys and press the start key.
2. Select MAINTENANCE and press the start key to output a list of the current settings of the maintenance items.
3. Press the stop key.
Exit maintenance mode.
1. Enter 001 using the numeric keys and press the start key. The machine exits the maintenance mode.
Print out the user setting list.
1. Select [Report Print] to output the user various setting reports.
Make test copies.
1. Place an original and make test copies.
Attaching the language label (230 V specifications only).
1. According to need, attach the correspond language label.
Completion of the machine installation.
1-2-10
Advertisement
Table of Contents
