Side Ejection Setting; Setting The Size Conversion Factor - Kyocera TASKalfa 300i Service Manual
Hide thumbs
Also See for TASKalfa 300i:
- Operation manual (426 pages) ,
- User manual (92 pages) ,
- Release notes (6 pages)
Table of Contents
Advertisement
Maintenance
item No.
Side ejection setting
U328
Description
Sets whether to eject to the side of the machine when an optional curl eliminator is installed.
Purpose
Set according to the preference of the user.
Setting
1. Press the start key.
2. Select [ON] or [OFF].
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
4. Turn the main power switch off and on.
Setting the size conversion factor
U332
Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here is used to
convert the black ratio in relation to the A4/Letter size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter size.
Setting
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
Calculation Rate
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
To eject to the side of the machine
Not to eject to the side of the machine
Description
Size parameter
Setting range
Initial setting
0.1 to 3.0
1.0
2K5
1-3-67
Advertisement
Table of Contents
