Setting Toner Near End Mode; Setting Toner Loading Operation - Kyocera TASKalfa 300i Service Manual

Maintenance
item No.

Setting toner near end mode

U136
Description
Sets whether to restrict printing operation when the toner is empty.
Purpose
To set to ON to remove restrictions on printing operation when toner empty is detected.
Setting
1. Press the start key.
2. Select [ON] or [OFF].
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting toner loading operation

U144
Description
Sets toner loading operation after completion of copying. Toner is forcibly evacuated in case the average print-
ing ratio for the number of printed pages assigned by [PAGE] is lower than the ratio defined by [RATIO].
Purpose
To set whether or not toner is loaded on the drum after low density copying. Normally no change is necessary
from the initial setting.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +/- keys.
Display
MODE
PAGE
RATIO
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Do not display an error or restrict printing operation when the toner is empty
Display an error and restrict printing operation when the toner is empty
Description
Toner loading operation
Number of pages set
Printing ratio
Setting range Initial setting
1 (ON) / 0 (OFF) 0
1 to 50 5
10 to 40 30
2K5
1-3-49