Kyocera TASKalfa 300i Service Manual page 152

2K5-1
Section Description
Optional 93
finisher Reverse sensor jam
(document finisher)
94
Paper entry sensor
stay/remaining jam
(document finisher)
95
Paper conveying sen-
sor jam (document fin-
isher)
96
Jam between the built-
in finisher and machine
(built-in finisher)
1-4-8
Conditions
The reverse sensor (SBS) does not turn on within speci-
fied time of paper entry sensor (PES) turning on (unfin-
ished reversing canceled).
The reverse sensor (SBS) is not turned on within speci-
fied time (unfinished reversing set).
The reverse sensor (SBS) is not turned off within speci-
fied time its turning on (resident reversing canceled).
The reverse sensor (SBS) is not turned off within speci-
fied time its turning on (resident reversing set).
The paper entry sensor (PES) is not turned off within
specified time its turning on.
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing canceled).
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing set).
The paper conveying switch (PCSW) is not turned on
within the specified time when paper is ejected to the fin-
isher tray from the process table.
Specified time
719 ms
431 ms
3000 ms
700 ms
2250 ms
2250 ms
656 ms
2000 ms