Checking The Operation Of The Dp Motors; Checking The Dp Switches - Kyocera TASKalfa 300i Service Manual

Maintenance
item No.

Checking the operation of the DP motors

U243
Description
Turns the motors or solenoids in the DP on.
Purpose
To check the operation of the DP motors and solenoids.
Method
1. Press the start key.
2. Select the item to be operated.
3. Press the start key. The operation starts.
Display
DP FEED MOT
DP CON MOT
DP REV MOT
DP RP SOL
DP RJ SOL
4. To turn each motor off, press the stop key.
Completion
Press the stop key when operation stops. The screen for selecting a maintenance item No. is displayed.

Checking the DP switches

U244
Description
Displays the status of the respective switches in the DP.
Purpose
To check if respective switches in the DP operate correctly.
Method
1. Press the start key.
2. Turn the respective switches on and off manually to check the status.
If the on-status of a switch is detected, the corresponding switch is displayed in reverse.
Display
TMG SW
REV SW
SET SW
SZ SW A
COV OP SW
DP OP SW
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Motor and solenoid
Original feed motor (OFM)
Original conveying motor (OCM)
Original switchback motor (OSBM)
Switchback pressure solenoid (SBPSOL)
Switchback feedshift solenoid (SBFSSOL)
Switches
DP timing switch (DPTSW)
Original switchback switch (OSBSW)
Original set switch (OSSW)
Original size length switch (OSLSW)
DP interlock switch (DPILSW)
DP open/close switch (DPOCSW)
2K5
Operation
In operation
In operation
In operation
On for 0.5 s
On for 0.5 s
1-3-59