Setting The Printing Area For Folio Paper; Checking The Operation Of The Fan Motors - Kyocera FS-C8520MFP Service Manual

Item No.
U035

Setting the printing area for folio paper

Description
Changes the printing area for copying on folio paper.
Purpose
To prevent cropped images on the trailing edge or left/right side of copy paper by setting the
actual printing area for folio paper.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting value using the cursor left/right keys.
Display
Length
Width
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U037

Checking the operation of the fan motors

Description
Drives each fan motor.
Purpose
To check the operation of each fan motor.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
All
Low Power
Container
IH Coil
LSU Cooling
IH Edge
To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Length
Width
Display
All fan motors are turned on
Power source fan motor (PSFM) is turned on
Container fan motor (CFM) is turned on
IH Coil fan motor (IHCFM) is turned on
LSU Cooling fan motor (LSUFM) is turned on
IH fan motor (IHFM) is turned on
Description
Setting range
330 to 356 mm
200 to 220 mm
Description
1-3-27
2MY/2MZ
Initial setting
330
210