Checking The Drum Count; Setting Separation Charger Mode - Kyocera TASKalfa 300i Service Manual

2K5
Maintenance
item No.

Checking the drum count

U110
Description
Displays the drum counts for checking.
Purpose
To check the drum status.
Method
1. Press the start key. The drum counter count is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting separation charger mode

U114
Description
Sets the separation charger mode.
Purpose
To change the setting if the fuser offset or carrier leaking occurs.
Method
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
Display
MODE
*: Entering a value other than 0 to 3 will engage the MODE3 (value 3) separation mode.
Details on the modes
Display
MODE0 (Value 0)
MODE1 (Value 1)
MODE2 (Value 2)
MODE3 (Value 3)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-46
Description
Description
Separation charger mode
Description
Full page separation for both first and second pages
First page: Separation on leading and trailing edges
Second page: Full page separation
Full page separation is activated for both first and second pages provided the
ambient temperature is less than 19
First page: Separation is activated for both leading and trailing edges, sec-
ond page: Full page separation, provided the ambient temperature is more
° °
than 20 C/68 F.
Separation is activated on both leading and trailing edges for both first and
second pages
Setting range
0 to 8 (0 to 3)*
° °
C/66.2 F.
Initial setting
3