Image Formation Problems; No Image Appears (Entirely White) - Kyocera TASKalfa 300i Service Manual

2K5
1-4-3

Image formation problems

(1)No image appears
(entirely white).
See page 1-4-35.
(6)A black line
appears longitudi-
nally.
See page 1-4-37.
(11)The leading edge
of the image is
consistently mis-
aligned with the
original.
See page 1-4-38.
(16)Fusing is poor.
See page 1-4-39.
1-4-34
(2)No image appears (3)Image is too light.
(entirely black).
See page 1-4-35.
(7)A black line (8)One side of the
appears laterally.
See page 1-4-37.
(12)The leading edge (13)Paper creases.
of the image is
sporadically mis-
aligned with the
original.
See page 1-4-38.
(17)Image is out of (18)Image center
focus.
See page 1-4-39.
(4)Background is
See page 1-4-36. See page 1-4-36.
(9)Black dots appear
copy image is
darker than the
other.
See page 1-4-37. See page 1-4-37.
(14)Offset occurs.
See page 1-4-38. See page 1-4-39.
does not align with
the original center.
See page 1-4-40.
(5)A white line
visible. appears longitudi-
nally.
See page 1-4-36.
(10)Image is blurred.
on the image.
See page 1-4-38.
(15)Image is partly
missing.
See page 1-4-39.