Fuser Section; Detaching And Refitting The Fuser Unit - Kyocera TASKalfa 300i Service Manual

1-5-7

Fuser section

(1) Detaching and refitting the fuser unit

Follow the procedure below to check or replace the fuser unit.
Procedure
1. Open the front cover.
2. Remove the clip holder.
3. Remove two screws and remove front left
cover.
4. Open the left cover 1.
5. Remove two screws and remove the left
cover hook.
Clip holder
Screw
Front left cover
Screw
Left cover 1
Screw
Figure 1-5-68
Left cover hook
Screw
Figure 1-5-69
2K5
1-5-37